The dew axing process consists of removal of glycerides and waxes from oil. By cooling the oil to the required temperature, giving proper retention time for wax crystals to grow and then filtered with the aid of Plate and Frame Filters. For different oils, temperature programme is different and different process parameters are followed. The plant will have crystallizer with maximum oil-to-heat exchanger area to facilitate the cooling with water. The plant will be designed to give cooling and maximum maturation period to get bold crystals and get good filtration.
Bleached oil is pumped from the storage tank by the pump and fed to the crystallizer. This oil is cooled very slowly and gradually to have a continuous decrease in temperature at an optimum rate to avoid any thermal shock to oil.
This helps to form big crystals. The cooled oil is subjected to required minimum temperature after the cooling cycle oil is provided with optimum residence / holding time and temperature for maturation of the formed winterized crystal and temperature is maintained to get optimum filtration. This oil is fed to Plate and Frame Filters by gravity to get the optimum capacity and quality. After filtration of oil, the filter is blown with air to get minimum oil in wax.
Brissun is a leading manufacturer, supplier & exporter of Dewaxing. Brissun Manufacture Cost Effective Dewaxing, and ensures low cost of production , and output of high quality. We also provides Turnkey Project for the complete Dewaxing. Dewaxing Plants, Dewaxing, Dewaxing process, Dewaxing machinery manufacturers, Dewaxing Plants manufacturers, Dewaxing project, Dewaxing industry, Dewaxing processing, Dewaxing processing machine, Dewaxing production process.